Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Creamy Shampoo - Happi
Hair Care

Creamy Shampoo

Creamy Shampoo
Ingredients
%

Phase A

  • Water
  • 57.548

Phase B

  • Natriquest E30 (Innospec) (Trisodium Ethylenediamine disuccinate)
  • 0.600

Phase C

  • Carbopol Aqua SF-2 (Acrylates crosspolymer-4)
  • 3.000

Phase D

  • Iselux SFS (Innospec) (Water (and) sodium methyl isethionate (and) cocoamidopropyl betaine (and) sodium cocoyl isethionate (and) sodium methyl oleoyl taurate)
  • 26.000
  • Pureact WS Conc (Innospec) (Sodium methyl cocoyl taurate)
  • 2.000

Phase E

  • Sodium hydroxide solution (25%)
  • 0.358

Phase F

  • Emulsil CT 50 (Innospec/Chemsil) (Dimethiconol (and) TEA-dodecylbenzenesolofonate)
  • 1.500

Phase G

  • Mackadet OPR-1 (Water glycol distearate (and) cocamidopropyl betain (and) glycol stearate)
  • 3.000
  • Water
  • 3.000

Phase H

  • Condicare PQ-7 (Innospec) (polyquaternium-7)
  • 1.000

Phase I

  • Euxyl K 712 (Water (and) sodium benzoate (and) potassium sorbate)
  • 1.000

Phase J

  • Fragrance
  • q.s.

Phase K

  • Citric acid (50%)
  • 0.794
  • Sodium, chloride
  • 0.200

Procedure

Charge water (A) into the main vessel. With moderate mixing, add Natriquest E30 (B). Add the Carbopol Aqua SF-2 (C). Slowly add Iselux SFS and Pureact WS Conc (D) sequentially to the batch. Heat to 50-55°C and mix until completely uniform. Remove heat and begin cooling. Adjust the pH with sodium hydroxide solution (25%) to 6.50-7.00. Add Emulsil Ct-50 (F) to the main batch. In a side vessel, premix water and Mackadet OPR-1 (G). Once uniform, add to the main batch. Slowly add Condicare PQ-7 (H) to the batch. At 40°C, add Euxyl K712 (I). Add fragrance (J). Adjust the pH of the batch using citric acid 50% solution (K) to 5.00-5.50. If further visicosity adjustments are needed, small increments of sodium chloride can be used. Note: This formula is salt-friendly. Viscosity can be increased by adding salt, reducing the pH or increasing the Carbopol Aqua SF-2.

Properties

Appearance—white, slightly pearlized flowable liquid; pH— 5.00-5.50; Viscosity, cps: 4,000-10,000 *Brookfield RV #5 @ 30 rpm, 25°C; Stability—8 weeks at room temperature, 45°C, 5°C and 3 cycles of freeze/thaw.

More Information

Innospec Performance Chemicals Email: America-pc@innospec.com Website: www.innospecinc.com

Topics